Gast 2D Series Bedienungsanleitung PDF herunterladen

2D SERIES MINIATURE PUMP

OPERATION and MAINTENANCE

INSTRUCTION MANUAL

70-2300(Rev. A)

G445PL

KEEP THIS DOCUMENT FOR FUTURE REFERENCE

This is the hazard alert symbol: When you

see this symbol be aware that personal injury or

property damage is possible. The hazard is

explained in the text following the symbol.

Read the information carefully

before proceeding.

The following is an explanation of the three

different types of hazards:

DANGER Severe personal injury or death

will occur if hazard is ignored.

WARNING Severe personal injury or death

can occur if hazard is ignored.

CAUTION Minor injury or property damage

can occur if hazard is ignored.

GENERAL SAFETY GUIDELINES

FOR THIS PRODUCT

WARNING

•Poor wiring can result in electric shock. Wiring

must conform to all required safety codes and be

installed by a qualified person. Refer to wiring

diagram on page 8.

•Always disconnect power source before servicing.

CAUTION

•Required ambient temperature is -10

F to 150

Operation at temperatures outside this range, will

reduce the life of the pump.

•Do not block the flow of cooling air over the pump

in any way.

•This unit is designed to pump gases only.

Ingestion of dirt, metal, water, or petroleum-based

contaminants will reduce the life of the pump.

Lower atmospheric pressure at high altitudes lowers perfor-

mance. Consult a Gast distributor for details.

Never lubricate this oil-less pump. The sealed bearings are

grease-packed. Introducing petroleum based or hydrocarbon

products will reduce the service life of the diaphragm and valve.

Ensure that nothing will interfere with the movement of the

eccentric. While not dangerous, the eccentric must move freely

to allow the pump to operated properly.

MOUNTING

To reduce noise and vibration, use Velcro or a vibration-isolated

mounting surface.

PLUMBING

To prevent air flow restriction, use an elastic hose of the same

size as the hose port. These ports are not designed to support

plumbing.

FILTERS

Avoid unfiltered operation in an environment where there is

visible airborne particulate material. Use a suitable filter to

avoid ingesting dirt/metal or other foreign material into the

pump.

WIRING

Ensure that the supply voltage agrees with the pump operating

voltage. Remove power to the pump if the motor fails to start or

stops under load. Warming the pump to a minimum of -10 F in

extremely cold weather will ease starting and extend the life of

the pump.

OPERATION

General recommendations for operation:

Avoid operating the pump at temperatures less than -10

F or

greater than 150

Draw through the pump only those substances which do not

react with PPS or EPDM (diaphragm and valve material).

Avoid unfiltered operation in an environment where there is

visible airborne particulate matter.

Avoid ingesting dirt into the pump.

Following these basic recommendations will avoid damage to

the pump and may extend its operating life.

1 2

Inhaltsverzeichnis

Seite 1 - INSTRUCTION MANUAL

2D SERIES MINIATURE PUMPOPERATION and MAINTENANCEINSTRUCTION MANUAL 70-2300(Rev. A) G445PLKEEP THIS DOCUMENT FOR FUTURE REFERENCEThis is the hazard al

Seite 2 - Replacement Parts

MAINTENANCEDo not attempt to replace the connecting rod or motor bearings.If after cleaning the unit and/or installing a new valve, the unit stilldoes

Kommentare zu diesen Handbüchern

Keine Kommentare

Gast 2D Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Pumpen Gast 2D Series herunter. Gast 2D Series User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Pumpen Gast 2D Series